Sitemap | 中文版
HomeAbout usProductApplication CasesQuality ControlPlace an OrderDownloadContact us
TINMAN AMP uses HG 2SC2879
HG 2SC2904 Used in IC725
HG MRF477 Feedback From USA User
HG FA641TB applied in Long March III Carrier Rocket
HG MRF477 used in 40W HF amplifier
HG FA431 applied in aerial refueling
HG 2SC1969,2N3866 application feedback
HG MRF466 is applied in single sideband radio
HG 2SC1971,2SC1972,2SC2539, 2SC3022 feedback
HG MRF317 applied in national design contest
Part Number:

RF Transistor
2SC Series (Toshiba, MIT)
BLF Series (NXP, Philip)
D*UK/DMD Series (SemeLAB)
DU Series (MA-COM)
MRF Series (MA-COM, MOTO)
MS Series (Mircorsemi, APT)
VRF Series (Mircorsemi, APT)
Other Series
HOT Sales
2SC2879
2SC2879C
Application Cases HomeApplication Cases
HG 2SC2904 Used in IC725

Use 2SC2904(Produecd by HG) to Repair my IC725

This material comes from "Hello CQ Forum".(Refer to following link)

http://www.hellocq.net/forum/showthread.php?t=280576&page=1&pp=30


I heard for years that a company produces various models of the launch tube, that is the price is very cheap. Over the past few years I design and development of the HF transceiver kit is also many, for lower cost considerations have been using IRF530640 or HEXFET pipe to make the launch tube. Although the effect is also good, but the heart is also very much hope to use professional launch tube. In the QQ group chat with everyone up power, no brakes, brain hyperemia decided to buy several pipe back to try.

Now do power amplifier board is late, then playing the IC725's idea. Because a lot of ICOM radio station in 2SC2904 make use of power tube, on Taobao out 2904 cheaper than imported cheap too much, I remember the original imported 2904 to nearly 300 yuan one. Then 2 days later, received 4 domestic 2SC2904.

Just trying to get 725 of the power amplifier apart, the year of machine design was long, remove the power amplifier is very troublesome.

It's 100 blocks of one only three transistors, I never had such an expensive new three transistors, although is made in china. The new pipe, tube feet bright polished tile.

According to IC725 repair manual, power level of the quiescent current, should be in 300mA. I don't know why, I the machine always in 120mA, in any case also did not transfer to 300mA. Using the original tubes as well, don't know is it right? Have a problem.

Test results, let me by surprise. Domestic 2SC2904 725 can work each band in the output power was to achieve 100 W, and there is no difference between the original pipe. When according to the forum 725 lover introduction method, adjustable power can reach 120 ~ 130 watts. Only for the domestic pipe resistance exercise capacity lack of confidence, finally in 100 watts. Try on several radio, continue for more than 1 hours, the machine temperature and output power are very stable.

Testing this, I feel very accidentally, also feel very excited. This tube is very inexpensive, 100 watts of output power, only need to increase the cost of 200 yuan.

I also learnd from a friend that he use HG 2SC2904 to repair ICOM 700PRO. The transistor works also well.

年前就聽說過無錫有一家公司生產各種型號的發射管,說是價格很便宜。但也有人說這家的管子容易壞,加上對國產這類器件多少也帶著點不信任的情緒,所以一直也就沒太過多的關注。

這幾年我設計開發的短波收發信機套件也是不少了,出于降低成本的考慮一直都在使用IRF530,640之類的HEXFET管子做發射管。雖然效果也還不錯,但是憑心而論也是十分希望用一用專業發射管。在QQ群里和大家聊起來功放,沒剎住車,頭腦充血決定買幾只管子回來試試。真不行的話,也就損失幾百塊錢,也讓我死了心罷!

現做功放板是來不及了,于是打起了IC725的主意。因為ICOM很多電臺都在使用2SC2904做功率管,上淘寶一查2904的價格是100元。這可比進口的便宜太多了,我記得原裝進口的2904要將近300元一只。于是2天后,收到了4只國產的2SC2904。

 
費老大的勁才把725的功放拆開,那年頭的機器設計的很羅嗦,拆功放很麻煩。
 
這可是100塊錢一只的三極管,我可從來沒整過這么昂貴的全新的三極管,雖然是國產的。新管子,管腳瓦明锃亮。
 
 
按IC725的維修手冊,功率級的靜態電流,應該在300mA。不知為何,我這臺機器總是在120mA,無論如何也調不到300mA。使用原裝管子的時候也是如此,不知道是不是有問題。

測試的結果,卻讓我大感意外。國產的2SC2904在725可以工作的各波段輸出功率居然都能達到100瓦,和原裝管子毫無差別。當按照論壇上725愛好者介紹的方法,調大功率可以達到120~130瓦。只是對國產管子的抗操能力信心不足,最后還是調在100瓦。晚上試通了幾個電臺,繼續了1個多小時,機器溫度及輸出功率均十分穩定。

測試到此,我感到十分意外,也感到十分興奮。這種管子價格很低廉,100瓦的輸出能力,只需要增加200元的管子成本。

WUXI Huago(HG) Semiconductor Co., Ltd.(無錫市華高微電子有限公司) Copyright 2016. All Rights Reserved(版權所有). ICP number(ICP 編號): 蘇ICP備11030609號
Address:6th Floor, 20# Building, 53 Xiuxi Rd, Binhu District, Wuxi, Jiangsu, China; Postcode: 214122
Tel: +86-510-81023902 +86-755-61285520  Fax:+86-510-81023909

  
 
成人午夜精品无码区,chinese mon@熟女,男欢女爱,黑丝美女
<蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>